Share

Insulation Drying Unit VE 4S Multiqube for air filtration at a maximum air flow rate, over pressure process for heated dry air and under pressure process for moist air suction

//Insulation Drying Unit VE 4S Multiqube for air filtration at a maximum air flow rate, over pressure process for heated dry air and under pressure process for moist air suction

In terms of value-for-money ratio, the VE 4 S Multiqube brings you the best offer in its class. With its specially made features, the VE 4S Multiqube comes with an ammeter, operating time counter, cable holder transport wheels with Rollstop catch and service socket that makes it a very competitive device in the market. The VE 4S multiqube is a hardwearing unit made with a robust ABS housing which is flexible enough to combine with other multiqube modules. The insulation drying unit has a push button that directly provides full side channel compressor power and can be used in both low and excess pressure operation. The insulation drying of surfaces for low pressure is up to 40 m² and for excess pressure is 50 m². They are to be operated in a vertical position only and placed on all 4 buffers or wheels on a level surface. 

The VE 4S Multiqube has a sound absorbing, electrically powered side channel compressors developed for operation in occupied rooms where noise should be kept to a minimum due to the nature of situation. it has a perfectly tunes system which offers a whole range of dehumidifying combinations. The VE 4S is made solely for the transportation of clean air and clean gases.

Applications of Insulation Drying Unit, model VAC-VE-4S

  1. It is used to provide an optimal air filtration at a maximum air flow rate
  2. It is used with over pressure process where heated dry air is vented through special openings in the insulation layers.
  3. It is used with under pressure process where moist air is suctioned out of the insulation layers using vacuum turbines
  4. It is used for drying insulation layers
  5. It is used for dehumidifying process
  6. It is used for contamination of the ambient air
  7. It is used for the transportation of clean air and clean gases
  8. It is used for damp proofing in construction areas to control moisture

Features of Insulation Drying Unit, model VAC-VE-4S

  1. It has an excess pressure and low pressure operation mode 
  2. It has an operating hour counter to calculate and monitor the operating duration between a certain time of period.
  3. It has a service socket for dehumidifiers connections and is protected by a safety fuse on the control panel.
  4. It has a high quality wheels with rollstop catch and solid rubber wheels sparing the floor
  5. It has system unit for combined use with filter ladder of flexible multiQube modules
  6. The operating elements of VE 4S multiqube is attached with shock protection
  7. It has a quick release fastener for a service-friendly maintenance of the device
  8. It has a cable holder for a better fixed position of cables
  9. The VX 4S is completely stackable for saving space 
  10. It has an ammeter installed with the device to measure the current in a circuit.
  11. It is made with a robust ABS housing which can be easily stacked for storage space saving and can be combined with other multiqube modules.
  12. The VX 4S is equipped with an ampere meter to control the drying construction.

Specifications of Insulation Drying Unit, model VAC-VE-4S for air filtration at a maximum air flow rate, over pressure process for heated dry air and under pressure process for moist air suction:

  1. For electrical values, the mains connection is 230 V/50 Hz
  2. It has a power input of 1.1 kW
  3. Its nominal current consumption is 7.5 A
  4. The recommended fusing is 16 A
  5. The Air flow (free outlet) has a stage max. of 150 m³/h.
  6. The recommended room size for excess pressure is 50 m²
  7. The recommended room size for low pressure is 40
  8. It has a max. excess pressure of 200 mbar
  9. It has a max low pressure of 175 mbar
  10. The motor protection for thermal contact is included in the standard equipment.
  11. For safety feature, a High-temperature bearing is attached for overheating protection.
  12. The dimensions of VE 4 S are L 420 x W 430 x H 415
  13. The weight of this device is 25.5 kg (packaging excluded)

We supply this VE 4S for air filtration at a maximum air flow rate, over pressure process for heated dry air and under pressure process for moist air suction in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply this VE 4S Multiqube for air filtration at a maximum air flow rate, over pressure process for heated dry air and under pressure process for moist air suction in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.