Water Separator WA 4I Multiqube for an optimized filtered airflow, water separator and dehumidifying process

With its integrated micro filter system, the new WA 4I is made with low-maintenance magnetic lock filter compartment with a threefold filter element. In one device comes with a versatile integral solution with all pre-HEPA filter stages. With regard to the insulation of surfaces up to 40 m², no other model is ideally suitable for holding a candle to this separator because, given its ultra-compact dimensions, this device is completely equipped with numerous practical comprehensive solutions, such a construction that is still easier to maintain, TTKwic fast couplings, cable holder, residual water drainage and more. It is geared to combine the use of Multiqube modules like the VE 4 multiqube weighing 6 kilograms and 100% downwardly compatible to previous models at the same time.

The WA 4I becomes more maintenance-friendly with a quick and easy exchange of only one cartridge. In the direction of air flow the micro filter cartridge with threefold filter element can be inserted into the filter compartment to provide even more security during application. The Micro filter cartridge is adjusted to the maximum airflow rate of the vacuum turbine with a required filter surface of 0.16 m² and nominal airflow rate of 50 m³ per filter element. The compressor of WA 4I is made with an auto Power off and Power on over flow protection. The water separator WA 4I enables suction of both contaminated air containing water and free water itself. In terms of storage, the WA 4I can be stacked on top of one another for up to 3 devices. 

Applications of Water Separator, model VAC-WA-4I

1. It is used to improve the airflow optimized filter technology
2. It is used as a water separator for insulation drying
3. It is used to keep water and dirt particles away from the intake flow of downstream side channel blower.
4. It is used to separate solid or dust particles to protect the insulation drying unit.
5. It is used to provide a better air filtration
6. It is used for contamination of the ambient air
7. It is used for the transportation of clean air and clean gases
8. It is used for dehumidifying process
9. It is used for damp proofing in construction areas to control moisture
10. It is used with over pressure process where heated dry air is vented through special openings in the insulation layers.
11. It is used with under pressure process where moist air is suctioned out of the insulation layers using vacuum turbines

Features of Water Separator, model VAC-WA-4I

1. It has an integrated micro filter system to take in micro filter cartridges with a threefold filter element.
2. It is made with a versatile integral solution that has a pre-HEPA filter stages all in one device.
3. Its filter technology is upgraded by 25% for the micro filter cartridge and flow-optimized filter compartment.
4. The filter is made with stainless steel demister for a fine filtration and water separation process.
5. It has a maintenance-friendly integral solution in one cartridge for an easier and fast exchange.
6. It has TTKwic quick couplings made for central water discharge for up to two connected dehumidifiers.
7. It has a residual water draining function installed in the device.
8. It has an integrated connecting cable used to combine other multiqube device.
9. It has a cable holder for a more organize presentation.
10. It has a high quality wheels with rollstop catch and solid rubber wheels sparing the floor for an easier control of moving from one place to another.
11. It is installed with an Overflow sensor that has an automatic switch-off control.
12. The design of WA 41 is stackable benefit you from saving space in such operations.
13. It is completely Impact-proof light material base and robust construction recyclable 100%.
14. It is easy to handle and easy to clean.

Specifications of Water Separator, model VAC-WA-4I for an optimized filtered airflow, water separator and dehumidifying process

1. For electrical values, the mains connection is 230 V/50 Hz
2. It has a power input of 0.32 kW
3. It has a nominal current consumption of 1.25 A
4. The recommended fusing is 16 A
5. The number of air transport hose connector is 3.
6. The diameter of air transport hose connector is 38 mm.
7. Its filter class is F8, and number of filters is 3.
8. It has a micro filter cartridge of 3xF8 acc. To DIN EN 779
9. The quick coupling is 2 x Ø 8 mm 
10. The dimensions of WA 4I are L 420 x W 440 x H 395
11. The weight of this device is 11.3 kg (packaging excluded)

We supply this VX 5 Multiqube for an optimized filtered airflow, water separator and dehumidifying process in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply this VX 5 Multiqube for an optimized filtered airflow, water separator and dehumidifying process in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.