Industrial Desiccant Dehumidifier for dry keeping in stores

With a high dehumidification performance of 86 kg/24h, the industrial desiccant dehumidifier is suitable for applications in various fields. The machine is encased in stainless steel, allowing it to endure harsh conditions and prevent corrosion. It also has an IP53-rated electrical control box that adds to its practical design. The dehumidifier has adjustable functions and requires low maintenance. Manufactured by Trotec in Germany, users can be assured that the machine is developed based on the utmost quality standards. 

The machines’s dehumidification process adheres to the TTR Trisorp Dual principle of operation. There are two ducts where process air and regeneration air separately flow and two fans through which each type of air is sucked in with a continuously rotating dessicant wheel in between. The process air flows into the dehumidification sector of the wheel where the silica gel takes its moisture and the resulting dry air is further directed to its outlet. The regeneration air, on the other hand, goes into the purging sector of the wheel. This sector allows the wheel to cool down and recover heat. Upon reaching the heater battery, the air heats up and passes through the regeneration sector of the wheel where it takes the moisture absorbed by the silica gel. This damp air is then discharged through its corresponding outlet. 

This process allows the desiccant dehumidifier to operate at air temperatures ranging from -20°C to 40°C and maximum relative humidity of 100% RH (non-condensing). 

Applications of Industrial Desiccant Dehumidifier, model no. VAC-TTR-800

1. It prevents corrosion and the formation of moulds in machine and structures. 
2. It is utilized in cold stores to control dew point and avoid frosting. 
3. It is used in water processing facilities and pump stations for dry keeping.
4. It is used in cleanrooms and drying rooms to control humidity.
5. It preserves the absorbtive properties of certain products during transport and storage through pre-dehumidification.
6. It is used in the dry air storage of military equipment and ammunition.
7. It is used in the manufacturing of plastics to avoid the formation of condensates. 
8. It is used in steel industries and gas distribution stations to regulate humidity. 
9. It maintains the humidity required in timber stores and electrical control centres. 
10. It is widely used by chemical, electronics, food, and pharmaceutical industries for dry air production.

Features of Industrial Desiccant Dehumidifier, model no. VAC-TTR-800

1. It can support a variety of voltages. 
2. It is encased in stainless steel with an IP53-rated electrical control box.
3. The air volume and performance of each fan can be easily regulated by means of the Duoventic control. 
4.  It has a filter monitoring unit with warning light.
5. The air flow direction is adjustable according to the user’s requirement through conversion.
6. It has Z-Line air filters (G4 Class).
7. It is equipped with an operating hours counter.
8. It operates through the TTR Trisorp Dual principle that allows the recirculation of neutral pressure. 
9. It has lockable doors and filter flaps that add to its service-friendly design.
10. It has a system with restart lock that protects the machine from overtemperature of regeneration air.

Specifications of Industrial Desiccant Dehumidifier, model no. VAC-TTR-800 for pharmaceutical, steel, and plastic manufacturing industries

1. The dimensions of the industrial desiccant dehumidifier are L734 × W649 × H942 mm. 
2. It has a stainless steel enclosure.
3. The dehumidification capacity of the Industrial Desiccant Dehumidifier model VAC-TTR-800  is 86.4 kg/24h or 3.6 kg/h (in case of intake air 20°C / 60 % RH).
4. It has potential-free contacts ((operation, fault, filter).
5. The nominal air volume is 750 m3/h for dry air and 130 m3/h for regeneration air. 
6. Regeneration heating is designed with electric resistance.
7. The external compression is 300 Pa for both dry air and regeneration air.  
8. It has Douventic control that regulates air volume.
9. The Industrial Desiccant Dehumidifier for pharmaceutical and food industries operates based on the TTR Trisorp Dual principle.
10. It works within the temperature range of -20°C to 40°C.
11. There is an overtemperature protection system with restart lock for regeneration air.
12. Maximum humidity is 100% RH (non-condensing).
13. The standard design is ideal for indoor installation.
14. The operating temperature management of regeneration air is enabled.
15. Volume of free-blowing air is 950 m3/h.
16. Heat recovery is integrated in the Industrial Desiccant Dehumidifier for electrical control centres.
17. Main electrical connection covers 380 – 480 V/50 – 60 Hz.
18. Air direction reversal can be figured through conversion of minimal effort.
19. Nominal current consumption is 7.5 A.
20. Filter can be monitored through air current and collective warning light.
21. It requires terminal electric connection.
22. Recommended fusing is 16 A.
23. The rotation of rotor and drive can be controlled.
24. It has a connection inlet and outlet of 250mm each for dry air.
25. Forklift pockets are suggested for mobility.
26. It has a connection inlet and outlet of 160mm each for regeneration air.
27. The operating temperature management of regeneration air is enabled.
28. Heating capacity is 4.1 kW.
29. It features non-stop automatic dehumidification.
30. The machine weighs 85 kg (packaging excluded).
31. The Industrial Desiccant Dehumidifier for use in cold stores works with various voltages.
32. There are available terminals for external ON/OFF and hygrostat.
33. It has an operating hours counter.
34. Installed capacity is 4.9 kW.

We supply these Industrial Desiccant Dehumidifiers in all Middle East countries including the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Lebanon, Egypt, Jordan, Libya, Tunisia, etc.